**T304/304H				ASTM A276, ASTM A479, QQ-S-763, SAE AMS5639, ASME SA479
T304/304L				ASTM A276, ASTM A479, QQ-S-763, SAE AMS5639, SAE AMS5647, ASME SA479
T316/316L				ASTM A276, ASTM A479, QQ-S-763, SAE AMS5648, SAE AMS5653, MIL-S7720AA2, ASME SA479

Hot Finished Flats Tolerances (also referred to at HRAP Flats or Mill Edge Flats) Width (inches) Width Tolerance Thickness Tolerances in Inches 1/8 - 1/2 over 1/2 - 1 over 1 - 2 over 2 - 4 over 4 - 6 over 6 - 8 to 1(incl) +0.015 -0.015 +0.008 -0.008 +0.010 -0.010 ----- ----- ----- ----- ----- ----- ----- ----- over 1 to 2 +0.031 -0.031 +0.012 -0.012 +0.015 -0.015 +0.031 -0.031 ----- ----- ----- ----- ----- ----- over 2 to 4 +0.062 -0.031 +0.015 -0.015 +0.020 -0.020 +0.031 -0.031 +0.062 -0.031 ----- ----- ----- ----- over 4 to 6 +0.093 -0.062 +0.015 -0.015 +0.020 -0.020 +0.031 -0.031 +0.062 -0031 +0.093 -0.062 ----- ----- over 6 to 8 +0.125 -0.156 +0.016 -0.016 +0.025 -0.025 +0.031 -0.031 +0.062 -0.031 +0.093 -0.062 +0.125 -0.156 over 8 to 10 +0.156 -0.187 +0.020 -0.020 +0.031 -0.031 +0.031 -0.031 +0.062 -0.031 +0.093 -0.062 +0.125 -0.156

**We do not have floor stock on the T304/304H but quotes are available from the mill.

Straightness Tolerance for Machined Straightened Bars
H F: 1/8" inch in any 5 foot; but may not exceed 1/8 x (length in ft/5)